Ear - Hook Style Dust Face Mask , FFP Dust Mask For Chemical / Industry

1 . Descriptions

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

2 . Material of each layer

Outer layer : Protective needle punched cotton
Middle layde : FFP1 melt blown filter(have filter efficiency level of 80%)
Inner layer : Shaped needle punched cotton

3 . Mask CE Quality Standards

1 . Stardard : EN : 149 : 2001 + A1 : 2009
2 . Test Machine : TSI 8130
3 . Test Flow : 95Liters/Min
4 . Test Medium : NACL & DOP

4 . feature


FFP1 Dust Mask with adjustable aluminum nose clip makes wearing more sealless leakage .
With latex-free elastic strap , soft nose liner , softer and fit the face .
Easy-breathing valve makes breathing more smooth .

5 . Directions for use

• The mask is for single use only.
• The mask should not be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.

​

6 . Packing

Normal Packing 20pcs/box,400pcs/ctn

7 . Points for Attention

1. This product is prohibited to be used with damaged package;
2. Do not use in atmospheres containing less than 19.5% oxygen, as this respirator does not supply oxygen; Not for use in oil mist atmospheres;
3. If the product becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the product;
4. This product is one-time use only and can not be washed;
5. This product should be stored in a clean, dry and ventilated environment with relative humidity less than 80% and without harmful gas.

8 . More pictures

Dongguan Wecare Medical Stech Co.,Ltd, a member of Kuasu group;

Was established in 2011, we offer a wide selection of products ranging from dust masks, protective masks, foldable masks, surgical masks, N95 respirator and KN95 Masks, etc.

Mask material, ozone air sterilizer and Automtic Mask making machines are direct partnered with manufacturers, that makes us able to provide one-stop service to our customers!    

We have a good strong and energetic team that enjoys high reputation from our buyers and partners all over the world, with their professional experience, quick service and efficient solution.

Since the COVID-19 outbreak, we have shipped millions of masks to our cusotmers over in USA, Canada, Germany, Norway, Italy, Austria, UK, Australia, Ireland, Czech and many other countries. Our company has 5 production lines and the daily capacity is around 500,000 pcs of N95, KN95 or disposable masks.