CE Approved FFP2 Valved Mask , Activated Carbon Dust Mask, Dust Particulate Respirator Mask

1 . Descriptions

MX-2006 FFP2V Cup Mask --Filters solid and liquid aerosols. Single-use.Conical shape. Adjustable nosepiece. Soft nose pad.Double elastic headband.With 4-plys, PP spunbond outer layer,actived carbon fiber filtration middle layer,PP meltbrown high filteration layer, PP spunbond inner layer.

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

2 . How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator performance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

3. Certification

This product has been tested according to the following European Standard:

4 . Packing

Normal Packing 12pcs/box,240pcs/ctn.

5 . FAQ

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.

6. More pictures

Dongguan Wecare Medical Stech Co.,Ltd, a member of Kuasu group;

Was established in 2011, we offer a wide selection of products ranging from dust masks, protective masks, foldable masks, surgical masks, N95 respirator and KN95 Masks, etc.

Mask material, ozone air sterilizer and Automtic Mask making machines are direct partnered with manufacturers, that makes us able to provide one-stop service to our customers!    

We have a good strong and energetic team that enjoys high reputation from our buyers and partners all over the world, with their professional experience, quick service and efficient solution.

Since the COVID-19 outbreak, we have shipped millions of masks to our cusotmers over in USA, Canada, Germany, Norway, Italy, Austria, UK, Australia, Ireland, Czech and many other countries. Our company has 5 production lines and the daily capacity is around 500,000 pcs of N95, KN95 or disposable masks.